3.2    "是否存在只有一个出口的楼层？在哪里？

  Isthere a floor with only one exit? Where is it?"

3.3    "是否有一些走道/门/楼梯的宽度低于标准的要求？

  Isthere any corridor/ door/ stair case width below standards?"

3.4    "工厂是否有采用非常规路线作为第二出口？ 如室外楼梯？

 Does the factory apply unconventional escape route as a secondary exit?Such as  external fire escaperoute."

3.5    "第一和第二出口是否设置在建筑物的两端，并且是通过独立的通道到达？

 Whether first and secondary exits are located on the opposite ends ofthe building and can be reached by independent exit pathways?"

4.     Fire escape routes must leadto safe assembly points without any obstructions. Assembly points must bedesignated and marked as such and must be kept clear at all times.

        火灾逃生路线必须无障碍地通向安全的集合地点。集合地点必须被指定并标明是此用途，且必须不得占用。

4.1   "工厂的集合地点设置在哪里？

 Where are the assembly points?"

4.2    "集合地点的面积是多大，需要容纳多少人？

  How big are the assembly points? How many persons they canaccommodate?"

4.3    "集合地点是否有明确表示？

 Whether the safe assembly point is designated and marked?"

4.4    "集合地点是否被阻塞？

 Whether the safe assembly point is blocked?"

4.5    "消防逃生路线是否通向集合地点？

     Whether the fire escape route leads to safe assembly point? "

5.     Proper access for firedepartment vehicles and other fire-fighting equipment in the factory premises.

        应为消防车和消防器械进出工厂留出通路。

5.1    "工厂是否为消防车和消防器械进出工厂设置通路？

 Whether proper access is maintained for fire department vehicles andother fire-fighting equipment in the factory premises?"

5.2    "通路的宽度为多少？

  What's the width is the access?"

6.     Adequate water supply forsprinkler and fire hydrant systems.

        应有足够的水源供洒水车和消防栓使用。

6.1    "工厂的消防用水供给来自哪里？城市给水管网、天然水源还是消防水池？

 Where does water resource come from? Municipal water supply network,natural water or fire pool?"

6.2    "工厂是否有安装室内消防栓？

 Whether indoor fire hydrants are installed?"

以上所有信息来源于验厂之家，如需了解更多资讯请关注：http://www.csr007.com